Los diferentes apartados, contienen el material que utilizamos para nuestros entrenamientos y la competición así como para la realización de talleres. El mismo ha sido probado y puesto a punto por propios alumnos e instructores. Por supuesto si quieres hacernos alguna consulta técnica o de disponibilidad del mismo, estamos a tu disposición. No dudes en contactar con nosotros.
The different sections have the same material that we use in our own workshops.The available material is supplied to the teaching in schools and workshops.It has been tested and been ready by pupils and teachers. If you want to ask any technical question, we are at your disposal, don´t hesitate to contact us, of course.
PRINCIPAL (home) - MOTORES (engines) - AVIONES (airplanes) - ACCESORIOS (accesories) - VUELO INTERIOR (indoor flight) - TÉCNICA (Technics)
BALL BEARINGS - COJINETES
info: clubtamaran@gmail.com
|
COJINETES
ESPECIALES PARA USO EN MOTORES
medidas interior x exterior x ancho SPECIAL BALL BEARING FOR MODEL ENGINES USE Meassures inside x outside x width |
|
|
STANDARD USE |
||
|
|
Ball bearing for standard use from Czech. Good quality. Used in most of
2.5 cc engines (.15) Parra, Mvvs, Rossi, Irvine, Fora15D junior,
etc...) C2 clearance 6 x 15 x 5 (normally used as front BB) from Czech 12 x 24 x 6 (normally used as rear BB) from Czech Retained material in Chrome Steel |
|
|
|
|
RACING USE - NSK JAPAN |
|
|
Ball bearing for RACING uses. Best quality. Used in most of 2.5 cc engines
(.15) Parra, Mvvs, SV, Fora, Rossi, Irvine, Fora 15D junior, etc...
MADE IN JAPAN INTERNAL CLEARANCE C-2 or C3 6 x 15 x 5 (normally used as front BB) from NSK Japan 12 x 24 x 6 (normally used as rear BB) from NSK Japan 10 x 22 x 6 (normally used as rear BB) from NSK Japan Retained material in Thermoplastic Polyamide |
|
|
RACING USE - WIB SWISS |
||
|
|
Ball bearing for RACING uses. Best quality. Used in most of 2.5 cc engines
(.15) Parra, Mvvs, SV, Fora, Rossi, Irvine, etc... SWISS MADE INTERNAL CLEARANCE C-4 or C-3 or C2 6 x 15 x 5 (7 balls for most 2.5 cc engines) from WIB swiss 12 x 24 x 6 (10 balls for PARRA, MVVS) from WIB swiss 10 x 22 x 6 (9 balls for TR F2C ) from WIB Swiss 12 x 21 x 5 (12 balls for FORA F2D) from WIB Swiss Retained material in Thermoplastic Polyamide |
|
| info: clubtamaran@gmail.com | ||
